Sign In | Join Free | My spintoband.com
China DOUBLE LIGHT ELECTRONICS TECHNOLOGY CO.,LTD logo
DOUBLE LIGHT ELECTRONICS TECHNOLOGY CO.,LTD
Professional LED maker from China Over 10 years of LED production experiences Sufficent supply,entirely quality assured
Site Member

8 Years

Home > Bi Color LED >

Super Red & Yellow Green 3mm Bi Color Led Common Anode or Common cathode Type with White Diffused Lens

DOUBLE LIGHT ELECTRONICS TECHNOLOGY CO.,LTD

Super Red & Yellow Green 3mm Bi Color Led Common Anode or Common cathode Type with White Diffused Lens

  • 1
  • 2
  • 3

Brand Name : Double Light

Model Number : DL-309SRGMA-A /C

Certification : RoHS/ REACH

Place of Origin : China

MOQ : 1,000pcs/bag

Price : US$ 0.035-0.06per unit (Pieces)

Payment Terms : Telegraphic Transfer in Advance (Advance TT, T/T)

Supply Ability : 1,000,000pcs per day

Delivery Time : 10 working days

Product Name : 3mm Bi-Color Super Red & Yellow Green LED

Package : 3mm Round With Flange DIP LED

Emitted Color : Super Red & Yellow Green

Product number : DL-309SRGMA-A /C

Color Temperature : Red:620nm, Yellow Green:570nm

Lens Type : White Diffused

Forward Voltage @20ma : Red:1.8-2.8V, Yellow Green:1.8-2.8V

Viewing Angle : Red:60 Deg, Yellow Green:60 Deg

Datasheet : Update

Contact Now

Datasheet:DL-309SRGMA-C.pdf Bi-color: Red and Yellow Green common cathode

DL-309SRGMA-A.pdf Bi-color: Red and Yellow Green common anode

Super Red & Yellow Green 3mm Bi Color Led Type White Diffused Lens

This is our 3mm Bi-Color With Common Anode or Common Cathode Type Super Red & Yellow Green LED, the 3mm Bi-Color series contain two integral chips and is available bi-color, the colors can do as you need.

Features:

  • Standard T-1 type package.
  • Super Red and Yellow Green chips are matched for uniform light output.
  • Common Cathode.
  • Long life solid state reliability.
  • Low power consumption.
  • I.C. compatible.
  • The product itself will remain within RoHS complaint Version.

Descriptions:

  • The lamp contain two integral chips and is available bicolor.
  • The Super Red and Yellow Green light is emitted by diodes of GaAsP/GaP and GaP respectively.
  • White Diffused lens color.

Applications:

  • TV set.
  • Monitor.
  • Telephone.
  • Computer.
  • Circuit board.

Absolute Maximum Ratings at Ta=25

Parameters Symbol Max. Unit
Power Dissipation Super Red PD 78 mW
Yellow Green 78

Peak Forward Current

(1/10 Duty Cycle, 0.1ms Pulse Width)

IFP 100 mA
Super Red Chip Forward Current IF 30 mA
Yellow Green Chip Forward Current IF 30 mA
Reverse Voltage VR 5 V
Operating Temperature Range Topr -40℃ to +85℃
Storage Temperature Range Tstg -40℃ to +100℃

Lead Soldering Temperature

[4mm (.157″) From Body]

Tsld 260℃ for 5 Seconds

Electrical Optical Characteristics at Ta=25℃

Parameters Symbol Emitting Color Min. Typ. Max. Unit Test Condition
Luminous Intensity IV Red 50 100 --- mcd IF=20mA
Green 30 55 ---
Viewing Angle 1/2 Red --- 60 --- Deg
Green --- 60 ---
Peak Emission Wavelength λp Red --- 630 --- nm IF=20mA
Green --- 565 ---
Dominant Wavelength λd Red --- 620 --- nm IF=20mA
Green --- 570 ---
Spectral Line Half-Width △λ Red --- 42 --- nm IF=20mA
Green -- 30 ---
Forward Voltage VF Red 1.80 2.20 2.80 V IF=20mA
Green 1.80 2.20 2.80
Reverse Current IR Red --- --- 10 µA VR=5V
Green

Notes:

  • Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
  • θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
  • The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

Reliability Test Items And Conditions:

The reliability of products shall be satisfied with items listed below:

Confidence level: 90%. LTPD: 10%.

1) Test Items and Results:

Test Item Standard Test Method Test Conditions Note Number of Damaged
Resistance to Soldering Heat

JEITA ED-4701

300 302

Tsld=260±5℃, 10sec 3mm from the base of the epoxy bulb 1 time 0/100
Solder ability

JEITA ED-4701

300 303

Tsld=235±5℃, 5sec

(using flux)

1time

over 95%

0/100
Thermal Shock

JEITA ED-4701

300 307

0℃~100℃ 15sec, 15sec 100 cycles 0/100
Temperature Cycle

JEITA ED-4701

100 105

-40℃~25℃~100℃~25℃ 30min,5min,30min,5min 100 cycles 0/100
Moisture Resistance Cycle

JEITA ED-4701

200 203

25℃~65℃~-10℃ 90%RH 24hrs/1cycle 10 cycles 0/100
High Temperature Storage

JEITA ED-4701

200 201

Ta=100℃ 1000hrs 0/100

Terminal Strength

(Pull test)

JEITA ED-4701

400 401

Load 10N (1kgf)

10±1sec

No noticeable damage 0/100
Terminal Strength (bending test)

JEITA ED-4701

400 401

Load 5N (0.5kgf)

0°~90°~0° bend 2 times

No noticeable damage 0/100
Temperature Humidity Storage

JEITA ED-4701

100 103

Ta=60℃, RH=90% 1000hrs 0/100
Low Temperature Storage

JEITA ED-4701

200 202

Ta=-40℃ 1000hrs 0/100
Steady State Operating Life Ta=25℃, IF=20mA 1000hrs 0/100
Steady State Operating Life of High Humidity Heat Ta=60℃, RH=90%, IF=20mA 500hrs 0/100
Steady State Operating Life of Low Temperature Ta=-30℃, IF=30mA 1000hrs 0/100

2) Criteria for Judging the Damage:

Item Symbol Test Conditions Criteria for Judgment
Min Max
Forward Voltage VF IF=20mA --- F.V.*)×1.1
Reverse Current IR VR=5V --- F.V.*)×2.0
Luminous Intensity IV IF=20mA F.V.*)×0.7 ---

*) F.V.: First Value.

Please read the following notes before using the product:

1. Over-current-proof

Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 The LEDs should be used within a year.

2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.

2.5 The LEDs should be used within 168 hours (7 days) after opening the package.

3. Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.

4. Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

For more details, please contact us.

Email:Facebook@doublelight.com.cn


Product Tags:

bi colour led

      

dual colour led

      
Wholesale Super Red & Yellow Green 3mm Bi Color Led Common Anode or Common cathode Type with White Diffused Lens from china suppliers

Super Red & Yellow Green 3mm Bi Color Led Common Anode or Common cathode Type with White Diffused Lens Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: DOUBLE LIGHT ELECTRONICS TECHNOLOGY CO.,LTD
*Subject:
*Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0